POBCO's H7 all plastic, molded, polyethylene is a derivative of high density polyethylene. These Pillow Blocks, 4-Bolt flanges, 2-Bolt flanges, and Rod Ends offer lower maintenence costs and durability in applications that require USDA Approved material. The Closed End feature is an added safety and sanitation benefit. This style is able to withstand chemicals typically used in plant wash down procedures, and USDA inspectors prefer the no greasing requirement of these parts.

Please inquire about specialty materials including PEEK and Rulon 641 with an increased range of bearing characteristics.

Pillow Block Style

Pillow Block Style
Thru Bore	Closed End	Shaft	ML	MH	CH	D	L	ExF	OD
PBH71.0	PBH71.0CE	1"	6.688	5.063	1.875	2.906	2.125	.565x1.063	2.063
PBH71.25	PBH71.25CE	1-1/4"	6.688	5.063	1.875	2.906	2.125	.565x1.063	2.063
PBH71.50	PBH71.50CE	1-1/2"	6.688	5.063	1.875	2.906	2.125	.565x1.063	2.063

4 Bolt Flange Style

4 Bolt Flange Style
Thru Bore	Closed End	Shaft	ML	MH	L	H	CE*
4FMH71.0	4FMH7.10CE	1"	3.750	2.750	1.530	0.465	1.280
4FMH71.25	4FMH71.25CE	1-1/4"	4.625	3.625	1.860	0.516	1.610
4FMH71.50	4FMH71.50CE	1-1/2"	5.250	4.000	2.060	0.516	1.810

*Closed End Only

2 Bolt Flange Style

2 Bolt Flange Style
Thru Bore	Closed End	Shaft	ML	MH	W	L	CE*	T
2FMH71.0	2FMH71.0CE	1"	4.889	3.889	2.715	1.530	1.280	0.500
2FMH71.25	2FMH71.25CE	1-1/4"	6.127	5.127	3.725	1.860	1.610	0.562
2FMH71.50	2FMH71.50CE	1-1/2"	6.907	5.688	4.125	2.060	1.810	0.625

*Closed End Only

Rod End

Rod End
Closed End	Shaft	A	B	CE*	OD	CH	G	H	F
HBRE1.0CE	1"	5.375	2.125	1.875	2.000	4.375	1.250	1.375	3.375
HBRE1.25CE	1-1/4"	5.375	2.125	1.875	2.000	4.375	1.250	1.375	3.375
HBRE1.50CE	1-1/2"	5.375	2.125	1.875	2.000	4.375	1.250	1.375	3.375

*Closed End Only