| |
Customize your roller with
the POBCO Roller Specification sheet. For commonly requested sizes and
materials, please review the following selection. The roller sizes below can normally ship quickly from stock or
with short lead times. Please inquire to confirm details.
|
“RPMN” Series-Light Duty
POBCO’s “RPMN” series rollers are constructed with 1.90” diameter, schedule
40 White PVC pipe, Molded Nylon Roll End Bearings, and bored to support a
1/2” diameter shaft, pin or stub shaft. These are an excellent, low cost, general
purpose roller, often used on sorting equipment. Overall length of roller is made
.25” shorter than the between frame dimension. |
| |
 |
| Between
Frame |
Thru-Bore
Part Number |
Blind-Bore
Part Number |
| 3.50” |
RPMNL3.25 |
RPMNL3.25BB |
| 4.75” |
RPMNL4.50 |
RPMNL4.50BB |
| 7.75” |
RPMNL7.50 |
RPMNL7.50BB |
| 10.25” |
RPMNL10.00 |
RPMNL10.00BB |
| 13.00” |
RPMNL12.75 |
RPMNL12.75BB |
| 16.00” |
RPMNL15.75 |
RPMNL15.75BB |
| 18.00” |
RPMNL17.75 |
RPMNL17.75BB |
| 22.00” |
RPMNL21.75 |
RPMNL21.75BB |
|
“RPU” Series-Medium Duty
POBCO’s “RPU” series rollers are constructed with 1.90” diameter,
schedule 40 White PVC pipe, UHMW Roll End Bearings, hex adapter,
and 7/16” Hex spring loaded shaft. These rollers are suitable for many
general purpose applications, and with the stainless shafting, they are
highly corrosive resistant. Overall length of roller is made.25” shorter
than between frame dimension. |
| |
 |
| Between
Frame |
Steel Shaft
Part Number |
Stainless Steel
Shaft Part Number |
| 7.75” |
RPUL7.50HEX |
RPUL7.50HEXSS |
| 10.25” |
RPUL10.0HEX |
RPUL10.0HEXSS |
| 13.00” |
RPUL12.75HEX |
RPUL12.75HEXSS |
| 16.00” |
RPUL15.75HEX |
RPUL15.75HEXSS |
| 18.00” |
RPUL17.75HEX |
RPUL17.75HEXSS |
| 22.00” |
RPUL21.75HEX |
RPUL21.75HEXSS |
|
“RPD” Series-Light Duty Gravity Roller
POBCO’s “RPD” series rollers are constructed with 1.90” diameter, schedule 40
White PVC pipe, Molded Delrin Roll End Bearings, and 7/16” Hex spring loaded
shaft. These rollers allow for easy installation in the side frame with spring
loaded shaft. These rollers are suitable for many light duty gravity conveyor
applications, and with stainless shafting, they are highly corrosive resistant.
Overall length of roller is made .25” shorter than the between frame dimension. |
| |
 |
| Between
Frame |
Steel Shaft
Part Number |
Stainless Steel
Shaft Part Number |
| 7.75” |
RPDL7.50HEX |
RPDL7.50HEXSS |
| 10.25” |
RPDL10.0HEX |
RPDL10.0HEXSS |
| 13.00” |
RPDL12.75HEX |
RPDL12.75HEXSS |
| 16.00” |
RPDL15.75HEX |
RPDL15.75HEXSS |
| 18.00” |
RPDL17.75HEX |
RPDL17.75HEXSS |
| 22.00” |
RPDL21.75HEX |
RPDL21.75HEXSS |
|
