POBCO Thrust Washers
POBCO thrust washers are furnished to customer specifications. Normally,the outside diameter is twice the shaft diameter. Non-cataloged thrust washers, including sizes larger than those listed, are available. Required dimensions are indicated in the drawing. Commonly supplied in UHMW,Nylon, Acetal, and PTFE.
Part Number | ID | OD | Thickness |
---|---|---|---|
TW*041002 | 1/4” | 5/8” | 1/16” |
TW*041004 | 1/4” | 5/8” | 1/8” |
TW*061202 | 3/8” | 3/4” | 1/16” |
TW*061204 | 3/8” | 3/4” | 1/8” |
TW*081602 | 1/2” | 1” | 1/16” |
TW*081604 | 1/2” | 1” | 1/8” |
TW*122204 | 3/4” | 1-3/8” | 1/8” |
TW*122208 | 3/4” | 1-3/8” | 1/4” |
TW*163204 | 1” | 2” | 1/8” |
TW*163208 | 1” | 2” | 1/4” |
TW*244804 | 1-1/2” | 3” | 1/8” |
TW*244808 | 1-1/2” | 3” | 1/4” |