About | Linear Motion Components | Support Components | Fasteners | Bearings | Rollers | Sheet/Rod | Pulleys, Sprockets, Wheels | Chain Tensioners | Product Worksheets

POBCO Sleeve & Flange Bearings

Flange and Sleeve Bearings

Available in POBCO-B Wood Bearing Material and a variety of POBCO Plastics including POBCO Ultra-D (UHMWPE), POBCO Plus (food grade fluid lube-filled UHMWPE) POBCO NYLONS, POBCO ACETAL and POBCO RULONS® Specify dimensions, shaft size and operating conditions. Two piece bearings are available. Design Guidelines When possible, the length to inside diameter ratio should be from 1:1 to 3:1. In general, the wall thickness should be approximately 15% of the shaft diameter. The choice of bearing material is also a determining factor in bearing design.

Some common sizes listed below. Many other sizes available, please inquire.

 

Pobco Sleeve Bearings

Part No.**
I.D. Inches
O.D. Inches
Length Inches
SL*0406008 1/4 3/8 1/2
SL*0608008 3/8 1/2 1/2
SL*0610008 3/8 5/8 1/2
SL*0810010 1/2 5/8 5/8
SL*0810012 1/2 5/8 3/4
SL*0810016 1/2 5/8 1
SL*0812014 1/2 3/4 7/8
SL*0812016 1/2 3/4 1
SL*0812024 1/2 3/4 1-1/2
SL*1012012 5/8 3/4 3/4
SL*1014014 5/8 7/8 7/8
SL*1216016 3/4 1 1
SL*1216024 3/4 1 1-1/2
SL*1218028 3/4 1-1/8 1-3/4
SL*1416012 7/8 1 3/4
SL*1416014 7/8 1 7/8
SL*1620012 1 1-1/4 3/4
SL*1620016 1 1-1/4 1
SL*1620024 1 1-1/4 1-1/2
SL*2024024 1-1/4 1-1/2 1-1/2

Non-cataloged sizes and shapes, including sizes
larger than thoses listed are available.

*Please specify Bearing Material
**See Bearing Materials to complete Part Number.

Pobco Flange Bearings

Part No.**
I.D. Inches
O.D. Inches
Length Inches
FL*0406008 1/4 3/8 1/2
FL*0608008 3/8 1/2 1/2
FL*0610010 3/8 5/8 5/8
FL*0610020 3/8 5/8 1-1/4
FL*0810010 1/2 5/8 5/8
FL*0810016 1/2 5/8 1
FL*0812012 1/2 3/4 3/4
FL*0812016 1/2 3/4 1
FL*1012012 5/8 3/4 3/4
FL*1014016 5/8 7/8 1
FL*1016020 5/8 1 1-1/4
FL*1416016 7/8 1 1
FL*1418018 7/8 1-1/8 1-1/8
FL*1214020 3/4 7/8 1-1/4
FL*1216012 3/4 1 3/4
FL*1216016 3/4 1 1
FL*1216020 3/4 1 1-1/4
FL*1620016 1 1-1/4 1
FL*1620024 1 1-1/4 1-1/2
FL*2024024 1-1/4 1-1/2 1-1/2

Flange Diameters and Flange Thickness will vary.
Contact Sales Department for Details.

 

POBCO Hi Temp Ultra-D for 275° F

FOR FLANGE ONLY

SLEEVE PART NUMBER FLANGE PART NUMBER ID INCHES OD INCHES LENGTH INCHES FLANGE DIAMETER FLANGE THICKNESS
SLUH0406008 FLUH0406008 1/4" 3/8" 1/2" 1/2" 3/32"
SLUH0610008 FLUH0610008 3/8" 5/8" 1/2" 7/8" 1/8"
SLUH0812016 FLUH0812016 1/2" 3/4" 1" 1" 1/8"
SLUH1014016 FLUH1014016 5/8" 7/8" 1" 1" 1/8"
SLUH1216016 FLUH1216016 3/4" 1" 1" 1-1/4" 1/8"
SLUH1620024 FLUH1620024 1" 1-1/4" 1-1/2" 1-1/2" 1/8"
SLUH2024032 FLUH2024032 1-1/4" 1-1/2" 2" 1-3/4" 1/8"
SLUH2428032 FLUH2428032 1-1/2" 1-3/4" 2" 2" 1/8"

POBCO Hi Temp POBLON for 500° F

FOR FLANGE ONLY

SLEEVE PART NUMBER FLANGE PART NUMBER ID INCHES OD INCHES LENGTH INCHES FLANGE DIAMETER FLANGE THICKNESS
SLTM0406008 FLTM0406008 1/4" 3/8" 1/2" 1/2" 3/32"
SLTM0610008 FLTM0610008 3/8" 5/8" 1/2" 7/8" 1/8"
SLTM0812016 FLTM0812016 1/2" 3/4" 1" 1" 1/8"
SLTM1014016 FLTM1014016 5/8" 7/8" 1" 1" 1/8"
SLTM1216016 FLTM1216016 3/4" 1" 1" 1-1/4" 1/8"
SLTM1620024 FLTM1620024 1" 1-1/4" 1-1/2" 1-1/2" 1/8"
SLTM2024032 FLTM2024032 1-1/4" 1-1/2" 2" 1-3/4" 1/8"
SLTM2428032 FLTM2428032 1-1/2" 1-3/4" 2" 2" 1/8"